Brakes/Levers/Pads
$27.99 - $39.99
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$42.99
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$54.99
Cost effective stopping power from the leader in cable-actuated disc brakes.
- For use with short cable-pull levers
- Mono-block caliper design has outboard pad adjustment
- Spring tension is adjustable
- Caliper has 74mm mounting bolt spacing; mounting adaptors are sold separately
- Brake Caliper Type: Post Mount
- Brake Lever Actuation: Short Pull
- Rotor Included: No
- Weight: 215 g
$99.99
Smooth, powerful braking performance that's simple to set up and easy to adjust. Bad weather or rough roads? Not even a factor with BB7's reliable mechanical performance. Compatible RED, Force, Rival and Apex levers.
- Road-specific
- Mechanical simplicity
- Adjustability
$29.99
Shimano XTR/XT/SLX 2-Piston Compatible Disc Brake Pads
$99.99 - $119.99
Every high-quality, Galfer-patented Wave® MTB/eBike 6-bolt disc rotor is made from a proprietary mix of virgin high carbon 420 stainless steel, laser cut (never stamped), double disc-parallel ground to assure perfect parallel flatness and heat treated to each specific application. Wave design comes from the Galfer motorcycle division and has been used across many disciplines at the highest level. Not compatible with Fulcrum AFS System.
- Wave ® design keeps brakes extremely cool in demanding conditions
- Made with a proprietary blend of 420 virgin stainless steel with high carbon content that provides better memory and friction
- Laser cut to reduce the stress of the steel during production
- 2.0mm thickness
- Includes 6 mounting bolts
- Precision made at the Galfer factory in Barcelona, Spain
$3.99
Linear pull brake noodles come in a variety of configurations designed to be compatible with any housing approach angle.
$19.99
The Dura Type insert pad was originally developed as an aftermarket upgrade for high end Shimano brake systems. The Kool-Stop Dura pads are the same spec as Shimano pads and fit Shimano, SRAM, TRP and Tektro holders with a set screw.
Compounds:
- Black: Kool-Stop's standard compound which is great for all weather conditions, but designed for dry condition riding.
- Ceramic: This compound was designed for ceramic coated rims and is great in all weather conditions.
- Salmon: Kool-Stop's most famous Salmon compound is also one of the most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry.
- Carbon: Kool-Stop's original carbon compound which works great for most carbon wheels but will wear quicker on fast steep descents.
- Dual: A fusion of Kool-Stop's two finest compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop!
Features:
- Patented Plow Tip
- Water Grooves
- Rim Friendly Compounds
- Fits 55mm length holders
$19.99
The Supra 2 is an updated design of the original Supra. This is one of Kool-Stop's most popular rim pads and offers a thicker friction material for longer life.
Features:
- Hardened and plated reinforced steel backbone
- Patented angled tip plow
- Water grooves
- Knurl-lock washer system
- Self tow in
- Available only in Threaded
- Rim Friendly Compounds
Compounds:
- Salmon - Kool-Stop's most famous Salmon compound is also one of our most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry.
- Electric - Kool-Stop's E-Electric compound is formulated specifically for the higher speeds and weights of electric bicycles.
- Clear - An extreme compound for only experienced trick or trails riders needing a compound that will instantly lock the wheels.
- Ceramic - This compound was designed for ceramic coated rims and is great in all weather conditions.
- Pink - Colored pads are a semi–aggressive compound that will give you good performance in all weather conditions.
Specifications:
- Weight per pair: 60.6 grams
- Overall length: 66.5 mm
- Pad contact width: 9.1 mm
$26.99
Kool-Stop disc pads are made with organic materials that are blended and bound together using a resin. The compounds do include small amounts of metal to improve the braking formula but though this is a mined material the pads are largely organic. The term semi metallic can also be used. Kool-Stop has found during testing that their disc pads are rotor-friendly and provide high performance braking throughout the life of the pad.
- Qty 1 = enough for 1 wheel
$29.99
- High performance compounds recommended for all-conditions
- Steel backing
$29.99 - $32.99
- High performance compounds recommended for all-conditions
- Steel backing
$34.99
• High performance compound recommended for all•conditions
• Alloy backing plate: 50% lighter than steel backing plate
$39.99
With a copper plated back plate, Kool-Stop sintered metal disc brake pads are designed to give your bike performance braking in extreme conditions, e.g. XC, downhill, trials and dual slalom riding. The pads have a quick break-in period so you get maximum performance during those demanding rides when stopping power, durability and long pad life are required.
$24.99
Replacement EBT screws close the bleed port on Magura brakes.
- Torque spec: 0.5 nM
- T25 head
$49.99
SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD).
- For use with Level Ultimate & Level TLM Brakes
- Pad Material: Organic
- Type: Road/CX
- Includes guide pin, clip, & pad spreader
$79.99 - $84.99
The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant.
- Compatible with both road and mountain bike brakes
- Rounded edges are UCI-compliant and allow for easier wheel installs
- Hub interface: CenterLock
- Rotor Type: Centerline
$139.99
With gobs of beautifully modulated power and intuitive easy-to-use adjustability, the BB7s set the standard in the realm of mechanical disc brakes. Inboard and outboard adjustor knobs, Tri-Align Caliper Positioning System, and integrated cable stop spring tension adjustment ensures that our standard is everyone else's goal.
- Mechanical simplicity
- Adjustability
$164.99
The SRAM CenterLine XR (CLX-R) rotor works in tandem with the SRAM eTap AXS drivetrain. It's designed specifically for road riding — and to keep braking quiet at every stop.
- Streamlined form optimized for road use
- CenterLine track offers quiet brake operation
- Two-piece design reduces weight
- Pair of N-type disc brake pads with fins, for 1 caliper
- Fits 4-piston SLX, XT and XTR calipers from 12-speed generation groups
- Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade during long, technical dowhnill stretches
- Longer lasting than D-type pads
- Spring included
$14.99
- R50T2 compound brake pads for BR-4600
- Also fits BR-4600, BR-3400 and BR-R450
- Adjustable toe-in and contact angle
- 5 pairs
$21.99
- Pair of K-Type disc brake pads without fins, for one caliper
- Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions
- Steel backplate for lower cost or Ti backplate for improved heat management and lower weight
- Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400
- Also compatible with XTR BR-M9100 calipers
- Interchangeable with L-type finned pads (except for XTR BR-M9100)
$24.99
- New resin pads have 50% more durability!
- Pair of G-Type disc brake pads without fins, for 1 caliper
- Resin compound, for improved modulation & lower noise
- Available with Steel backplate for lower cost or Aluminum backplate for superior heat management
- Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes
- Interchangeable with F-Type and J-Type pads
- Includes spring and pin
- Disc Pad Material: Resin
- Pad Shape: Shimano G-Type/F-Type/J-Type
- Backplate: Aluminum
- Pad Spring: Included
- Cooling Fins: No
- Model Compatibility: BR-M8000
$29.99
K04S Disc Brake Pads
- Compatible with Shimano Models: BR-M9100, BR-M9110, BR-M8110, BR-R9270, BR-R8170, BR-R9170, BR-R8070, BR-R7070, BR-4770, BR-RS805, BR-RS505, BR-RS405, BR-RS305, BR-U5000, BR-RX810, BR-RX400
- Sintered Metal pad provides consistent, high stopping power in wet or dry conditions with excellent durability
- Ventilated stainless steel backing plate for improved heat dispersion
$31.99
- 107mm arch gives a better mud guard clearance
- Updated rubber boots
- Strong braking power with excellent braking control
$32.99 - $36.99
The Shimano Deore SM-RT54 disc brake rotors provide exceptional stopping power in all riding conditions. Shimano's Center Lock mounting system makes installing and removing rotors quick and easy thanks to the spine mount and lock ring design.
- For use with resin pads only
- Center Lock lockring design offers fast and easy installation
- Includes external type rotor lockring
- Compatible with all axles
$34.99
- Shimano, SM-RT56 Rotor, 180mm or 160mm, ISO, for resin pads only
- Stainless steel rotor
$42.99 - $48.99
- Pair of D-Type disc brake pads without fins, for 1 caliper
- Available with Resin or Metallic brake compound
- Fits most 4-piston Shimano brakes, including XTR BR-M9120, XT BR-M8120, XT-BR-M8020, SLX BR-M7120, Saint BR-M820 and BR-M810, Zee BR-M640 and non-series BR-MT520 and BR-MT420 calipers
- Can be used as a lower cost alternative to H-Type or N-Type pads
- Includes spring and pin
$47.99
- New resin pads have 50% more durability!
- Pair of J-Type disc brake pads with fins, for 1 caliper
- Resin compound, for improved modulation & lower noise
- Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes
- Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade during long, technical dowhnill stretches
- Longer lasting than G-type pads
- Interchangeable with F-Type and G-Type pads
- Includes spring and pin
$47.99
- Pair of J-Type disc brake pads with fins, for 1 caliper
- Available with resin or metallic compound
- Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes
- Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade during long, technical dowhnill stretches
- Longer lasting than G-type pads
- Interchangeable with F-Type and G-Type pads
- Includes spring and pin
Page 1 of 2
Next page