Filter By:
- Bar Ends (2)
- Bottom Brackets (12)
- Brakes/Levers/Pads (55)
- Cables (9)
- Cassettes/Freewheels (18)
- Chainrings (26)
- Chains (11)
- Cranksets (7)
- Show More Categories
- Derailleurs (17)
- Handlebar Grips/Tape (13)
- Handlebars (10)
- Headsets (2)
- Pedals (17)
- Saddles/Pads (12)
- Seatposts (2)
- Shift/Brake Combinations (7)
- Shifters (2)
- Stems (7)
- Other (34)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
$1,479.99
Rally RS200 is tested to the extreme, so you can ride there too. This dual-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding.
- Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to ensure total reliability. Featuring a superior design with sensors housed inside, these sleek pedals install like any pedal. And they're quick to transfer between bikes.
- Advanced Cycling Dynamics—In addition to total power and cadence, Rally RS200 measures much more. These metrics help you tailor your training around your specific weaknesses and strengths to help you improve.
- Left/Right Balance—Measure power from your left leg versus power from your right leg to get a better look at how symmetrically you're producing power.
- Seated vs. Standing—Track the amount of time you spend in each position and gauge position effectiveness.
- Power Phase—Get a clear look at where you're producing power in the pedal stroke.
- Platform Center Offset—Ensure proper cleat position by keeping track of where power is applied on the pedal.
- Cleat Compatibility—For a comfortable ride, these pedals are designed with your favorite Shimano SPD-SL cleats in mind.
- Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round. A transferable spindle can be installed in Rally RS road or Rally XC off-road pedal body kits (each sold separately).
- Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life.
Specs:
- Battery type: LR44/SR44 (x4) or CR1/3N (x2)
- Battery life: up to 120 hours
- Maximum rider weight: 105kg
- Accuracy: +/- 1%
- Field calibration
- Adjustable release tension
- Measurement location: spindle
- Communication: ANT+ and BLUETOOTH
- Weight: 320g
- Water resistance: IPX7
- Cleat type: SPD-SL
- Q-factor: 53mm (55mm with provided 2mm washer)
- Stack height: 12.2mm
In the Box:
- Rally RS200 pedals
- Cleat hardware
- 55mm Q-factor washers
- Documentation
$939.99
Rally XC100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding.
- Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes.
- Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally XC100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately).
- Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite Shimano SPD cleats.
- Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately).
- Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life.
Specs:
- Battery type: LR44/SR44 (x4)
- Battery life: up to 120 hours (with LR44 battery type)
- Weight: 316g
- Water resistance: IPX7
- Max. rider weight: 105kg
- Accuracy: +/- 1.0%
- Cleat type: Shimano SPD
- Q-factor: 53/55mm with supplied spacing washer
- Stack height: 13.5mm
- Field calibration
- Adjustable release tension
- Garmin Connect
- Measurement location: Spindle
- Communication: ANT+ and Bluetooth
In the Box:
- Rally XC100 pedals
- Cleat hardware
- 55mm Q-factor washers
- Documentation
$899.99
An integrated bar and stem combo that cleanly and securely holds cables for a refined look and added aerodynamics.
Save watts, ride faster
This aero upgrade cleans up your cockpit by securely storing cables for a refined look and free speed. The Aeolus RSL bar/stem combo is proven in the wind tunnel to save 7 watts, making it 10% faster than its predecessor. It's light, fast, easy to install, and Blendr-compatible for seamless integration of your light or Garmin.
Details:
- OCLV Carbon construction is ultra-light, compliant, and durable
- Integrated bar/stem design improves aerodynamics and saves weight
- Proven in the wind tunnel to save 7 watts, making it 10% faster than its predecessor
- Integrated cable management system held secure with M4 hex bolt, 5Nm torque
- Variable Radius Compact (VR-C) design allows longer reach and drop
- Includes Blendr mono and duo bases with mounts for Ion light and Garmin computer
- Approved for use with carbon or alloy steerer
$879.99
Rally RS100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding.
- Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes.
- Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally RS100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately).
- Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite Shimano SPD-SL cleats.
- Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately).
- Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life.
Specs:
- Battery type: LR44/SR44 (x4) or CR1/3N (x2)
- Battery life: up to 120 hours
- Maximum rider weight: 105kg
- Accuracy: +/- 1%
- Field calibration
- Adjustable release tension
- Measurement location: spindle
- Communication: ANT+ and BLUETOOTH
- Weight: 328g
- Water resistance: IPX7
- Cleat type: SPD-SL
- Q-factor: 53mm (55mm with provided 2mm washer)
- Stack height: 12.2mm
In the Box:
- Rally RS100 pedals
- Cleat hardware
- 55mm Q-factor washers
- Documentation
$839.99
The Shimano Dura-Ace FC-R9200 crank performs two vital functions; transferring your pedaling effort into the drivetrain and ensuring the fastest, most precise front shifting available. With HOLLOWTECH II crank arms to ensure light weight and Shimano's class-leading chainring designs, the FC-R9200 won't let you down.
- Optimal balance of stiffness, strength, weight and rotational performance
- HOLLOWGLIDE structure cuts weight yet maintains strength for better power transfer and quicker, more precise front shifting
- 148mm Q-factor
- 44.5mm chainline
$699.99
The XG-1299 cassette completes the expression of the world's most accomplished and sought after bikes. Designed for use with our proven, reliable XD driver body, this 12-speed cassette offers a massive gear range. In independent tests, the X-Dome architecture is proven to yield the strongest cassette on the market. New shifting characteristics improve both inboard and outboard shifting as well as chain retention.
- SRAM’s cassette manufacturing technology provides the greatest durability and lightest weight
- All-new shifting features create a smoother, quieter system with enhanced inboard and outboard shift performance
- XD driver body compatible
Cogs
- 10 – 50T: 10, 12, 14, 16, 18, 21, 24, 28, 32, 36, 42, 50
- 10 – 52T: 10, 12, 14, 16, 18, 21, 24, 28, 32, 36, 42, 52
$549.99
The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Shimano Ultegra R8000 crank arm and is compatible with all Shimano Hollowtech II road drivetrains.
Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter.
Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions.
Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system.
Additional features:
- ± 1.5% accuracy in all conditions
- Active temperature compensation
- Accelerometer based cadence measurement
- Wirelessly upgradable firmware
- LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset
- Updated accelerometer and addition of gyroscope for improved cadence resolution
- Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength
Specifications
- Power meter housing: low profile design, with robust door interface
- Weight: Only adds 15g to base crank arm
- Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter
- Power range (Watts): 0 to 5000
- Cadence range (rpm): 10-220
- Water resistance rating: IPX7
- Sizing Options:
- Lengths: 165mm, 170mm, 172.5mm, 175mm
Includes:
- Power Meter
- High quality CR2032 coin cell battery
- Lifetime access to Stages Link for power meter management and firmware upgrades.
- 2 months free access to Stages Link premium training and coaching features.
- Product Identification Card with Serial Number and ANT+ I.D. Number.
- User Guide
$499.99
The new Charger 2.1 damper upgrade kit allows the fork to ride higher in the travel on compression while keeping the tires planted to the ground for unmatched control.
- Upgrades Charger 2.1 RC2 with crown high speed, low speed compression (includes complete right side internals)
- Compatible with Zeb A1+ (2021+)/Domain B1+ (2022+)- Includes complete right-side internals
$494.99
An integrated handlebar/stem that delivers aesthetically pleasing performance in a lightweight package.
Lust worthy looks, elevated performance
Elevate your ride and upgrade to the Bontrager RSL MTB Handlebar/Stem for a super-clean one-piece carbon combo. This OCLV Carbon bar sets the benchmark for lightweight durability, and with Blendr allowing seamless integration of electronics, your cockpit has never looked or performed better.
RSL MTB Handlebar/Stem is compatible with both Knock Block and standard type headsets, so there's no excuse not to make the switch to this drool-worthy performance piece.
Product details
- OCLV Carbon construction is the benchmark for durability and light weight
- Compatibility with Knock Block and standard headset types (adapter included)
- Seamless accessory integration with Blendr (mounts sold separately)
- Shifter and brake lever position lines for spot-on control setup
- 40mm trim lines allow for a personalized fit
- Titanium hardware is lightweight and long-lasting
$484.99
Get back on the road with a genuine replacement stem.
Original equipment replacement stem for your Madone SLR.
PRODUCT DETAILS
- Low fit stem is to be used to create an H1 comparable fit
- Not compatible with other bikes
- For installation instructions, please see your Madone Assembly Manual
$479.99
The uninterrupted shifting experience of the Shimano Dura-Ace R9200 12-speed cassette range lets you climb, sprint, and push your limits without stopping to think about your next gear change. Larger driving cogs maximize drivetrain efficiency and create compatibility with both Shimano 11 and 12-speed freehub bodies. Shimano HYPERGLIDE+ technology is integrated to provide seamless shifts both up and down the gear range.
- Faster, seamless shifts under maximum pedaling load
- Refined 12 step gear combination provides peak efficiency and accelerating performance for every situation
- Compatible with 12-speed and road 11-speed freehub body
$449.99
Shimano Deore XT RD-M8050 Di2 Rear Derailleur
- Accurate and stable shifting in any condition
- Instant response
- Customized shift speed within Multi-shift
- Powerful shifting
- Seamless gear change even under high load
- Smart and efficient gear selection with Shimano Synchro Shift
- Single lever operation
- Rider-programmable shift mapping
- Drivetrain Speeds: 11
- Maximum Sprocket: 42T(2x11-speed)/46T(1x11-speed)
- Minimum Sprocket: 11T
- Front Difference: 10T
- Total Capacity: 35T
- Average Weight: 320 grams
$419.99
An integral part of the Shimano Ultegra 12-speed road lineup, the FC-R8100 crankset builds upon Shimano's legendary front shifting and transmission efficiency. With new refinements for seamless 12-speed shifting, the Ultegra crank is now offered in a wide variety of lengths, bringing performance and improved fit for smaller riders, triathletes, and riders with specific biomechanic requirements.
- Optimal balance of stiffness, strength, weight and rotational performance
- Hollowglide structure cuts weight yet maintains strength for better power transfer and quicker, more precise front shifting
- 148mm Q-factor
- 44.5mm chainline
$409.99
Shimano Ultegra R8020 hydraulic shift/brake levers.
- Greater rider control in all conditions
- Hydraulic disc brake provides the next stage of control
- Small bracket size improves ergonomics
- Greater reach adjust range
- Quick and intuitive rear shifting operation with redesigned internal shifting unit
- Model Number: ST-R8020
- Series: Ultegra
- Shift Cable Casing: OT-SP41
- Shift Cable: Polymer coated
- Average Weight: 550 grams/pair
$409.99
Shimano Ultegra Di2 Shadow rear derailleur.
- Sleek integrated appearance
- New low-profile design
- Shimano Shadow RD
- Race endurance
- Optimized slant angle
- Maintain race concentration with more intuitive shift control
- System communication with front derailleur
- Shimano Synchronized Shift
- Wide compatibility
- Short cage covers: 11-25T to 11-30T
- Medium cage covers: 11-28T to 11-34T
- Average Weight: 242 grams (SS type), 249 grams (GS type)
$399.99
Take on longer rides and rougher roads with Bontrager's Pro IsoCore road handlebars. Feel the difference 20% less road vibrations can make on your next gravel grinder or gran fondo. IsoCore inner-laminar technology and IsoZone padding combine to virtually eliminate road chatter while maintaining the strength of our OCLV carbon.
$399.99
Shimano's Dura-Ace 10-speed Cassette is comprised of an aluminum cog carrier, 4 titanium and 6 steel cogs (from largest to smallest respectively). This makes for a super-light and stiff cassette that makes your derailleur shift like a dream so you can dance up the climbs as easily and efficiently as your chain climbs up and down these cogs.
$374.99
Get your saddle down and out of the way and up your technical skills with a game-changing dropper. For quick and convenient routing or frames not drilled for internal dropper seatposts, the Koryak External is an ideal choice.
- AL-7000 series
- Infinite travel 150mm
- External cable routing
$369.99
- Excellent Pedaling Efficiency
- Optimized Balance Of Weight And Rigidity
- Injection Molded Carbon Composite Body
- Hollow Cleat Bolt
- Efficient Power Transfer
- High Stability
- Extra-Wide Platform
- Efficient Power Transfer/Durability
- Reduces Flex And Pedal Body Wear
- Stainless Steel Body Plate
- Excellent Pedaling Efficiency
- Smooth Rotation
- 2-Ball Bearing, 1-Wide Roller Bushing
- Reliable Durability Performance
- Stable And Uniform Load Distribution
- Wide Bearing Placement
- Rider Tune
- Customize The Entry And Release Tension Settings
- Adjustable Entry And Release Tension Settings
- Shimano 3-Year Limited Warranty
- Average Weight: 224g
- Shimano SPD-SL cleats included
- Standard (52mm)
- Wide (56mm)
$344.99
Shimano Saint hydraulic disc brakes feature an opposed ceramic 4-piston design which helps absorb rotor heat and reduce vibrations. The Servo Wave 2-finger levers feature tool-free stroke and position adjustment, while the one-way bleeding caliper and hinged lever clamp offer easy installation and maintenance.
- Brakes are pre-bled for convenient installation
- Includes metal ICE TECH pads with radiator fins
- I-spec B-type shift lever compatible
$324.99
Comfort without sacrificing power
Aeolus Pro brings comfort, power, and speed to road riders looking to dig deep and rotate further forward into a more aero position. This uber-light, race-ready saddle was tested and pressure mapped with male and female athletes for the ultimate in proven performance. A shorter overall length with a wider nose and full cut-out ensure targeted support that eliminates soft-tissue pressure for both men and women.
Product details
- inForm saddles are born of cutting-edge biomechanical research to maximize performance and rider comfort
- Designed to support riders in an Aero Road riding position
- Full saddle cut-out minimizes soft-tissue pressure allowing for a more powerful, rotated position
- Two sizes designed to align saddle with bone structure for both men and women and avoid soft-tissue compression
- Oversized carbon rails for lightweight strength. Specific seatpost ear clamps required
- Lightweight carbon-reinforced shell provides perfect balance of weight, strength, and compliance
- Minimal Pro-level padding offers sleek profile that shaves weight
- Available Blendr accessory mounts to cleanly integrate rear light
$314.99
Shimano's new FC-RX810-2 crank balances weight and efficiency for mixed-terrain riding. Gearing options cater for the specific demands of gravel riding and to maintain tighter gear steps for maintaining pedaling rhythm. The 2x11-speed crank is available in a 48-31T, 40T, and 42T chainring combination and 170, 172.5, and 175mm crank arm lengths.
- Gravel gear ratios preserve riding rhythm over rough surfaces with wider tires
- Optimum gearing for mixed terrains and riding styles
- Wide-range double
- Gear combinations: 48-31T, 40T, 42T
$309.99
The Shimano 105 R7020 Dual Control Levers bring the all condition confidence of hydraulic disc brakes and refined ergonomics to the quick and intuitive shifting cyclists expect from Shimano.
Features:
- Great ergonomics cascaded from ULTEGRA
- Greater reach adjust range
- Redesigned internal shifting unit
- Greater rider control in all conditions
- Quick and intuitive rear shifting operation
- Same light shifting operation as top tier systems
- Lighter front shifting when paired with FD-R7000 (compared with previous generation)
$299.99
The Shimano GRX BL-RX810-L brake lever offers greater rider control for mixed terrain riding thanks to Shimano's category-leading hydraulic disc brakes. Gravel-specific ergonomic shape provides more control on bumpy terrain.
- Gravel-inspired lever and bracket ergonomics
- Anti-slip brake lever
- Greater mixed-terrain control
- Designed to be used with a 1x gear setup
$279.99
Shimano Ultegra R8000 pedals.
- Pro-level performance and lightweight for the enthusiast
- The legacy of Shimano design, quality and performance
- Carbon-composite body
- Extra-wide platform for a more efficient transfer of power
- Adjustable entry and release tension settings
- 4mm longer axle available
- Low stack height
- 0.7mm lower than PD-6800
- Model Number: PD-R8000
- Series: Ultegra
- Pedal System: SPD-SL
- Average Weight: 248 grams
$274.99
The Shimano Tiagra ST-4720 hydraulic shift/brake lever brings the all-conditions confidence and refined ergonomics of hydraulic disc brakes to the quick and intuitive shifting cyclists expect from Shimano Tiagra.
- Smooth and effortless operation that offers quick and intuitive shifting operation
- Greater reach adjust range allows for better rider comfort and control in all conditions
- Redesigned internal shifting unit
- Compatible with Shimano road 10-speed rear derailleurs
$274.99
The Shimano Tiagra ST-4725 Dual Control Levers bring the all-conditions confidence of hydraulic disc brakes and refined ergonomics to the quick and intuitive shifting cyclists expect from Shimano Tiagra.
- Dedicated lever for riders with smaller hands with smaller lever size and new positioning for improved ergonomics
- Smooth and effortless operation
- Redesigned internal shifting unit
- Greater confidence and control for riders with smaller hands in all conditions
- Quick and intuitive rear shifting operation
- Same level of shifting operation as high-end road groupsets
$274.99
Integrates seamlessly into frame.
Genuine replacement parts
Keep your Speed Concept looking fresh.
- Only compatible with Speed Concept
- Flippable head
$269.99
When it’s time to update the flagship XTR pedals, we look at every detail under a microscope. Off-road racing demands speed, focus, and control. And that’s exactly what the PD-M9120 delivers. Increased drivetrain efficiency, an intuitive and seamless interface, and predictable steering and traction control are the benchmarks of the M9100 series pedals. The M9120 are the weapon of choice for WC racers worldwide.
BETTER MUD CLEARANCE
- Cylindrical contact area sheds mud even better for consistent stepping-in & out performance and rider confidence.
ADDED EFFICIENCY + DURABILITY
- Increased axle strength for long service life. M9100 comes in two axle lengths – 52 mm and 55 mm crank to pedal center.
LARGER CONTACT AREA
- The M9120 platform is designed for maximum shoe-to-pedal contact area without extra weight or rotating mass. Cage protects the binding and makes step in easy.
BETTER MUD CLEARANCE
- Wider edge-to-edge contact area provides solid shoe-to-pedal interface, transmits power more efficiently for faster and more consistent acceleration, and better bike control.
$264.99
With a focus on reduced weight and cross-country tuned stopping power, Shimano SLX M7120 brakes provide intuitive modulation so that you can explore your limits with confidence. The BL-M7100 levers feature an optimized lever axle position, an additional handlebar contact point for greater stiffness, and refined ergonomics for rider comfort. At the caliper end, the BR-M7120 4-piston caliper is optimized for the toughest enduro trails.
- 10% stiffer than previous generation M7000, even under high-temp conditions
- Quicker brake engagement with shorter free stroke
- Tool-free lever reach adjustment
- I-SPEC EV Clamp Band enables optional integrated shifter setup
- Includes finned metal pads
Page 1 of 9
Next page