Filter By:
- Bar Ends (2)
- Bottom Brackets (11)
- Brakes/Levers/Pads (59)
- Cables (10)
- Cassettes/Freewheels (21)
- Chainrings (25)
- Chains (12)
- Cranksets (6)
- Show More Categories
- Derailleurs (15)
- Handlebar Grips/Tape (19)
- Handlebars (10)
- Headsets (2)
- Pedals (22)
- Saddles/Pads (11)
- Seatposts (2)
- Shift/Brake Combinations (6)
- Shifters (3)
- Stems (6)
- Other (34)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
$44.99
3D Forged 6061-T6 alloy.
- Strong, stiff and light
- Rugged design can handle the demands of today's All-Mountain rider
- Low stack height
- 31.8 Bar clamp, 0 rise
- 150g (45mm length)
$27.99 - $39.99
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$42.99
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$54.99
Cost effective stopping power from the leader in cable-actuated disc brakes.
- For use with short cable-pull levers
- Mono-block caliper design has outboard pad adjustment
- Spring tension is adjustable
- Caliper has 74mm mounting bolt spacing; mounting adaptors are sold separately
- Brake Caliper Type: Post Mount
- Brake Lever Actuation: Short Pull
- Rotor Included: No
- Weight: 215 g
$99.99
Smooth, powerful braking performance that's simple to set up and easy to adjust. Bad weather or rough roads? Not even a factor with BB7's reliable mechanical performance. Compatible RED, Force, Rival and Apex levers.
- Road-specific
- Mechanical simplicity
- Adjustability
$19.99
With this clever little clamp you can quickly retro-fit any bike for a rear rack. Threaded eyelets are built into the clamp for easy, secure mounting on non-eyeleted or smaller frames.
- Features threaded eyelets for rear rack mounting solutions on unique bike frames
- Quick release (QR) versions include rubber lever grip
$20.99
These bar end adapters are required if you wish to add clamp-style bar ends to your Bontrager Satellite Plus Isozone handlebars.
- Required for bar end use on Satellite Plus Isozone bars
- For use with clamp style bar ends
- Includes 2 adapters and 2 rubber handlebar inserts.
- Bar end sold separately
$21.99
Key features:
- Original equipment replacement saddle ears for use with Bontrager saddles with carbon rails
- Compatible with Bontrager and Trek rotary head seatpost and seat mast systems
- Consult with manufacturer on compatibility with other saddle brands
$23.99
Original equipment replacement rear derailleur hangers.
Get back on the road with a quality replacement hanger.
Product details
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications
- Mounting location: Rear drive side
- Attachment: 1-bolt
$29.99
Cold-forged for strength, bead-blasted for grip
These bar ends feature a no-slip gripping surface and offer more comfortable hand position options.
Bar ends offer increased comfort, greater variability in hand positioning, and improved leverage for climbing. Bontrager Forged Bar Ends are cold-forged for strength and durability and bead-blasted for better grip and control on the trail.
Product details
- Cold-forged, welded alloy construction
- Bead blasted finish provides grip and adds strength
- Offset tube design for more usable handlebar area
$29.99
This classic bar tape combines the traditional feel of natural cork with the vibration damping power of gel for a comfortable ride feel and a clean aesthetic that will never go out of style. It's easy to install and comes with Bontrager finishing strips and bar end plugs.
- Gel tape with natural cork feel
- Ideal stretch for quick and easy installation
- Inner gel strip for extra comfort
- Finishing strips and reflective Bontrager bar end plugs included
- Non-adhesive backing
$29.99
Made with recycled materials, this grip features a contoured shape and dual-density construction for ultimate support on any trail.
Lock-on comfort
Take the long way with the XR Endurance Comp Recycled Grip made using recycled plastics at the grip core. Contoured shaping provides comfort and support, while an opposing tread pattern ensures your palms are padded and your fingers stay in place. This Dual-Density grip features a lightweight lock-on design that securely attaches to any bar.
Using recycled materials in this product helps provide second life to unwanted end of life plastics.
Product details
- Grip core is made from recycled plastic
- Contoured design comfortably supports palm to decrease fatigue
- Opposing tread pattern absorbs shock in palms and increases grip at fingertips
- Dual-density compound provides secure grip, control, and comfort
- Continuous tread pattern optimizes grip for moisture management and shock absorption
- Lock-on clamp securely holds grip core to bar, eliminating slipping
Features:
The net effect
Fishing nets make up an estimated 10% of all plastic in the ocean. What's even worse is that they're 4 times more harmful to the ocean environment than all other forms of plastic pollution.
A global issue
Each year 18 billion pounds of plastic enters the ocean, polluting beaches and waterways around the world.
Better products for a better planet
We're committed to lightening our footprint and designing for circularity wherever possible. This product and others contain recycled material and are made using planet-friendlier manufacturing processes.
$44.99
Confident and durable
The versatile Line Comp Flat Pedal is built from durable nylon for a solid platform with integrated traction, so every time you place your foot on your pedal your shoe stays put. Line Comp is strong enough to use on your mountain bike, but also at home on your city or commuter bike. A durable frame and solid axle with sealed cartridge bearings ensure lasting performance.
Versatile flat pedals with a durable nylon body and forgiving traction tread that delivers consistent, confident grip.
- Durable nylon body with a proven shape for comfort and confidence
- Sturdy axle boosts durability and spins smoothly on sealed cartridge bearings
- Nylon traction pins provide forgiving, confident traction
- Simple to install with either 6mm hex or standard 15mm pedal wrench
$49.99
Fitness-focused Posture 4 saddle with comfort of a cut-out design.
Fitness focused, and designed for comfort
The Sport saddle brings performance, support, and comfort to the posture 4 fitness rider. A full cutout design eliminates soft tissue pressure and the saddle's soft padding ensure an ultra-comfortable ride for the cyclist seeking performance in an upright seated position.
Product details
- Fitness Posture 4 features an upright pelvic rotation to go farther, faster
- Contour Relief Zone Plus (CRZ+) full saddle cut-away enhances soft tissue protection
- Tough, weather-resistant cover repels water
- Sleek, supportive padding provides comfort while maintaining performance
Specifications
- Size: 275mm x 163mm
- Length: 275mm
- Width: 163mm
- Rail dimensions: Round 7x7mm (Standard)
- Cover material: Microfiber
- Rail material: Steel
- Weight: 350g
$49.99
Fitness-focused Posture 4 saddle with comfort of a cut-out design.
Fitness focused, and designed for comfort
The women's Sport cycling saddle provides performance, support, and comfort that is tailor made for the female fitness rider. A full cut-out design and soft padded design adds comfort to every ride and helps make staying fit more fun.
Product details
- Fitness Posture 4 features an upright pelvic rotation to go farther, faster
- Engineered specifically to yield better fit and greater comfort for women
- Contour Relief Zone Plus (CRZ+) full saddle cut-away enhances soft tissue protection
- Tough, weather-resistant cover repels water
- Sleek, supportive padding provides comfort while maintaining performance
Specifications
- Size: 275mm x 167mm
- Length: 275mm
- Width: 167mm
- Rail dimensions: Round 7x7mm (Standard)
- Cover material: Microfiber
- Rail material: Steel
- Weight: 355g
$54.99
Take care of your hands with an ergonomic, paddle-shape design that evenly distributes pressure across your hands and helps reduce hand fatigue. The Satellite Elite Grip features a dual-density compound that offers variable padding and unparalleled vibration absorption to ensure comfort on every ride.
Key features
- Dual-density compound design provides secure grip, control, and comfort
- Contoured design comfortably supports palm to decrease fatigue
- Lock-on clamp securely holds grip core to bar, eliminating slipping
$64.99
The Bontrager Comp VR-C offers a compact design and slightly shallower drop while still retaining the classic Variable Radius shape, providing quick, comfortable transitions from the hoods to the drops for sprints.
- Custom-butted, 6061-T6 alloy construction
- Variable Radius Compact (VR-C) design allows longer reach and drop
- Compatible with clip-on aero bars
- Shot-peened finish increases fatigue life
- Laser-etched brake lever position lines for spot-on control setup
$64.99
Run your favorite 31.8mm clamping diameter handlebar on a bike with Knock Block with the Rhythm Comp 31.8. It adds Knock Block compatibility to a durable stem with multiple lengths to let you fine-tune the fit to your ride.
Get 31.8mm handlebar compatibility with your Knock Block system;Also compatible with standard headsets and spacers;Knock Block system protects frame from impacts by fork and handlebars by eliminating over-rotation of bars;Available in a wide range of sizes for today's mountain rider;See Service Parts for other Knock Block parts;
$84.99
An aluminum road handlebar with a versatile shape that is suitable for the widest range of road cycling.
FLARED CONFIDENCE
The Bontrager Comp Road Handlebar is built around an Endurance Fit that offers everyone a comfortable and confident riding position. With 10 degrees of flare and hoods that are 4cm narrower than the drops, there's ample wrist clearance for everyday riding as well as your hardest sprints. Laser-etched setup guides, a shot-peened finish, and clip-on aerobar compatibility round out the Comp Road Handlebar's excellent versatile package.
PRODUCT DETAILS
- Lightweight 6061-T6 aluminum
- Hoods measure 4cm narrower than drops
- 10 degrees of flare provides confidence in the drops and ample wrist clearance
- Compatible with clip-on aero bars
- Laser-etched brake lever position lines for spot-on control setup
- Shot-peened finish increases fatigue life
- Endurance Fit offers everyone a comfortable and confident riding position
$99.99
A comfort saddle with a patented fluid technology that moves freely with you as you pedal for less pressure and more comfort.
Bontrager's Boulevard Fluid saddle puts your comfort first with patented fluid technology that moves with you to reduce pressure while you're pedaling. The full cutout design and air foam deliver a difference you can feel on casual cruises through your town and neighborhood. Plus, it has an integrated mount for a tail light!
Product details
- Fluid adds comfort by moving with you as you pedal to alleviate pressure
- Fluid is better than gel at reducing pressures, showing an average reduction of over 20% in peak pressure compared to gel alone
- Full cutout provides targeted support and soft-tissue relief
- Dual-density shell and air foam construction is soft yet supportive
- Blendr attachment allows for integrated rear light mounting
- inForm saddles utilize the latest in biomechanical research to maximize performance and rider comfort
- The Unconditional Bontrager Guarantee offers 30 days to love it, or we'll take it back
$99.99
A fitness saddle with a patented fluid technology that moves freely with you as you pedal for less pressure and more comfort.
Bontrager's Commuter Fluid Saddle moves with you to reduce pressure on fitness rides and commutes. The patented fluid technology performs better than standard gel—and it's paired with air foam and a full cutout for soft tissue protection and support. Plus, you can easily attach a Flare tail light to the rear-facing Blendr mount!
Product details
- Fluid adds comfort by moving with you as you pedal to alleviate pressure
- Fluid is better than gel at reducing pressures, showing an average reduction of over 20% in peak pressure compared to gel alone
- Full cutout provides targeted support and soft-tissue relief
- Dual-density shell and air foam construction is soft yet supportive
- Blendr attachment allows for integrated rear light mounting
- inForm saddles utilize the latest in biomechanical research to maximize performance and rider comfort
- The Unconditional Bontrager Guarantee offers 30 days to love it, or we'll take it back
$99.99
Feel the difference
The inForm Satellite Plus IsoZone system is the comprehensive defense against hand and wrist discomfort. By pairing integrated elastomer handlebar inserts with advanced ergonomic grips, this bar and grip combo reduces peak hand pressure by nearly 30% while reducing vibration and absorbing impact for a smoother, more enjoyable ride.
Product details
- Custom-butted, 6061-T6 alloy construction
- IsoZone elastomer inserts offer reduced upper body fatigue
- Performs best when combined with inForm IsoZone grips (included)
Specifications
- Backsweep: 9 deg.
- Upsweep: 4 deg.
- Material: Alloy
- Weight: 487g
$109.99
A 35mm mountain bar that maintains a forgiving ride feel and maximizes strength with minimal weight.
Large and in charge
Line 35 is ready for any terrain and changes what's possible on the trail. It maintains comfort and control on any ride, and an oversize clamping diameter increases strength and decreases overall bar and stem weight while ensuring a compliant, forgiving ride. Proven sweep and convenient graphic markings help dial in the perfect setup.
Product details
- Oversized 35mm clamp diameter offers lighter weight and higher strength than 31.8mm diameter
- Quad-butted, tapered wall, 7050-T6 aluminum construction
- Laser-etched brake lever position lines for spot-on control setup
$129.99
An aluminum handlebar with IsoZone pads that displace vibration and a compact flare that increases wrist clearance.
Integrated Comfort
Ready to ditch the wrist fatigue that accompanies rough road rides? IsoZone foam pads are integrated directly into the tops of the alloy Elite IsoZone bar for a 20% displacement in vibration. Features Di2 compatible ports for clean internal wire routing when integrated with Shimano EW-RS910 bar-mounted Di2 junction. Soak up the chatter and ride on in comfort while enjoying a better looking cockpit.
Product details
- Custom-butted, 6066-T6 alloy construction
- Variable Radius Compact Flare (VR-CF) increases wrist clearance for ergonomic positions
- Compatible with Shimano EW-RS910 bar end Junction-A for cleaner Di2 routing
- Compatible with clip-on aero bars
- Shot-peened finish increases fatigue life
- Laser-etched brake lever position lines for spot-on control setup
$134.99
Our most versatile saddle gets a shorter profile for targeted comfort, perfect for riders of all genders and all disciplines.
Short stature, consistent comfort
The Verse Short Comp’s shorter profile elevates comfort across all riding positions with targeted support thanks to a versatile design that’s ideal for riders of any gender. A full central cutout eliminates pressure while Wing Flex allows the saddle’s edges to adapt to riders’ inner leg movement and pelvic rotation.
Product details:
- Short profile provides targeted support for any gender rider in a performance riding position
- Wing Flex allows the shell's edges to adapt to rider's inner legs movement and pelvic rotation
- Full saddle cutout minimizes soft tissue pressure for lasting comfort and performance
- Lightweight shell balances weight, strength, and compliance
- Comp-level trim optimizes foam padding for added lightweight comfort
- Multiple widths and extended rail clamping area give more fit options
- inForm saddles are born of cutting-edge biomechanical research to maximize performance and rider comfort
- Blendr accessory mounts offer clean integrated mount for rear Flare light
Features:
For men, for women, for mountain, for road.
Verse Short is designed to add comfort for all genders. It's your go-to performance posture saddle for both trail and road.
Short profile
The short profile provides targeted support and a performance riding position for all genders.
Wing flex
Wing flex allows the saddle shell's side edges to flex and adapt to a rider's inner leg movement and pelvic rotation.
Full-length cutout
A full saddle cutout minimizes soft tissue pressure for lasting comfort and performance.
$139.99
A gravel handlebar with a wider flare that gives riders more comfort and control through any terrain.
The bar with a flare for adventure
The GR Elite Road Handlebar is a lightweight alloy bar designed to give gravel and adventure riders more comfort, control, and confidence, especially when in the drops. IsoZone EVA pads deliver entire-ride comfort, while the bar's 75mm reach, 128mm drop, and 13-degree flare make it easy to access brake levers and shifting controls from all riding positions.
Product details
- 13-degree flare allows for more control in the drops
- Custom-butted, lightweight 6061-T6 alloy construction
- Shorter reach and wider flare allows for confident handling and easy access to controls
- Replaceable IsoZone EVA pads add comfort while maintaining original grip diameter
- Compatible with Shimano EW-RS910 bar end Junction-A for cleaner Di2 routing
- Laser-etched brake lever position lines for spot-on control setup
- Compatible with clip-on aero bars
$159.99
A light, durable 35mm MTB stem that adds Blendr capability for clean, integrated mounting of lights or computer.
Equip your whip with this 35mm Line Pro stem and give yourself the oversized advantage. Forged from light and strong 7075-T73 3D aluminum, the oversized 35mm design offers increased strength and a lighter overall bar and stem system weight. Use with included Blendr base and mount for integrated mounting options for light or computer.
Product details
- Oversized 35mm clamp diameter offers increased strength and minimal weight
- 7075 T73, 3D, forged alloy construction
- Laser-etched calibration marks make dialing in the perfect angle simple and repeatable
- Compatible with both Knock Block and standard headsets and spacers
- Blendr compatible for an elegant, integrated accessory mounting solution
- High-strength, corrosion-resistant steel bolts
- Includes Blendr mono base, Garmin Mount, and Ion Light Mount
- Approved for carbon bars
$169.99
In the race against the clock, Bontrager's Race Lite Clip-On Aerobars S-Bend give you the advantage you need. Adjustable arm rests and extensions allow you to dial in your profile position so you can comfortably stay in a wind-slicing tuck. And the internal cable routing keeps everything out of the wind, nice and neat.
$209.99
A lightweight carbon road handlebar that features a variable, compact radius for multiple hand positions.
The Pro VR-C is a lightweight carbon road handlebar that features a unique Variable Radius Compact bend that creates the ideal hand position for quick transitions from the tops to the drops. Integrated Di2-compatible ports offer clean internal wire routing when used with Shimano EW-RS910 bar-mounted Di2 junction.
Product details
- OCLV Carbon construction
- Variable Radius Compact (VR-C) design allows longer reach and drop
- Laser-etched brake lever position lines for spot-on control set-up
- Compatible with clip-on aero bars
- Compatible with Shimano EW-RS910 bar end Junction-A for cleaner Di2 routing
$214.99
Comfort without sacrificing power
Aeolus Elite brings comfort, power, and speed to road riders looking to dig deep and rotate further forward into a more aero road position. It's the go-to race saddle for both men and women who want to comfortably get the most out of their aero road bike. A shorter overall length with a wider nose and full cut-out ensure targeted support that eliminates soft-tissue pressure.
Product details
- inForm saddles are born of cutting-edge biomechanical research to maximize performance and rider comfort
- Designed to support riders in an Aero Road riding position
- Full saddle cut-out minimizes soft-tissue pressure allowing for a more powerful, rotated position
- Two sizes designed to align saddle with bone structure for both men and women and avoid soft-tissue compression
- Austenite rails are lighter and stronger than hollow Titanium
- Lightweight shell provides balance of weight, strength, and compliance
- Elite-level trim optimizes foam padding for added lightweight comfort
- Available Blendr accessory mounts to cleanly integrate rear light
Page 1 of 10
Next page